rock drill

The T51 threaded drill bit is a specially designed drill bit suitable for rock drilling operations with high hardness and severe wear under high air pressure. This bit has excellent penetration rates and high strength steel-resistant floating properties, making it ideal for optimizing digging efficiency. Our T51 thread drill bits are manufactured with high-quality materials, which ensures its long life and excellent performance. In addition, our factory has advanced production equipment and strict quality control, so that our products have been widely recognized and trusted in exporting to Europe, America and Southeast Asia. If you are looking for a solution to increase efficiency in challenging mining environments, the T51 threaded drill bit will be your best choice.

Liaoning Gaea high-quality thread button drill bits are constructed using top-grade alloy steel bars and tungsten carbides, and undergo rigorous heat treatment to ensure exceptional durability, toughness, and efficiency for meeting the demands of rock drilling tasks. Featuring superior energy-efficiency while operating, our drill bits experience minimal energy loss while drilling through hard rock surfaces with ease.

Compared with the traditional chip bit, the threaded button bit has the characteristics of long grinding cycle and fast drilling speed

Through heat treatment,our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks

Thread button bits made with high quality of best quality alloy steel bar and tungsten carbides, through heat treatment so that it can withstand the toughest rock drilling demands, and transmit intensive impact energy into the rock with the least possible loss of energy

Thread button drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment,our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks

The taper button bit is a kind of drill bit used with the pneumatic rock drill and the taper rod. It is connected with the drill rod through the taper for drilling operations. It has a good powder discharge effect, strong crushing ability and fast rock drilling speed. Convenient for grinding.

The main role of the bit is to transfer torque, propulsion, impact and flushing medium to the drill pipe and bit

Operation process: 1.Connect the power supply and let the equipment run empty for 1-2 minutes. 2.Move the handle to the chuck close to the support plate A. 3.Marking the end of the distance brazing rod at the end of 330mm. 4.Put the rod into the chuck.The identification of the step 6.3 brazing rod is aligned with the outer edge of the support plate A, and the work piece is tightened. 5.Slowly moving the handle, the speed of about 1-1.2mm/seconds, Repair of brazing rod at uniform speed.