rock drill

Operation process: 1.Connect the power supply and let the equipment run empty for 1-2 minutes. 2.Move the handle to the chuck close to the support plate A. 3.Marking the end of the distance brazing rod at the end of 330mm. 4.Put the rod into the chuck.The identification of the step 6.3 brazing rod is aligned with the outer edge of the support plate A, and the work piece is tightened. 5.Slowly moving the handle, the speed of about 1-1.2mm/seconds, Repair of brazing rod at uniform speed.

Liaoning Gaea Rock Split Machinery Technology Co.,Ltd is a manufacturer which have rich experience in rock splitting technical and export quarrying and drilling tools to all over the world.We provide scheme design,device manufacture and drilling tools sell. We devote to research,scheme design, products manufacture and sell the steady, trustable and cost-efficient rock splitting system solutions. Product including: Rock blasting system; Rock demolition tools; Jack hammer; Drilling rods; DTH hammer; Shank adapter; Button bits; DTH bits; Tricone bits;

Gaea Rock professional in manufacture extension rod.T38 T45 T51 GT60.length including 1830-5525mm.

Liaoning Gaea Rock Split Machinery Technology Co.,Ltd is a manufacturer which have rich experience in rock splitting technical and export quarrying and drilling tools to all over the world.We provide scheme design,device manufacture and drilling tools sell. We devote to research,scheme design, products manufacture and sell the steady, trustable and cost-efficient rock splitting system solutions.T45 extension rod including：3050 3660 4300 4915 5525mm

The rock drill machine is a kind of high efficlency Hand hole or alir leg support rock drill machinery.

The gasoline rock drill is a kind of hand held rock drilling equipment which is composed of small gasoline engine, compressor and rock drill.

The rock drill jack hammer is a kind of high efficiency air leg rock drill machine.It is mainly used for blasting holes and other drilling works in a quarries, railway construction, water conservancy construction and national defence project facility.When it is matched with Model FY250 Oil reservoir and Model FT160A or FT160B Air-leg , it is suitable for wet drilling under various of rocks at aclinic and incline orientation,it can also use in the trolley without Air-leg.

Pneumatic air jack hammer are hand-held construction machines that use compressed air as power and use impact to break hard objects. It is a hand-held machine, so it needs to be compact and portable

The water-air slagging mechanism relies on the external injection joint to flush the water or gas through the drill tail, drill pipe,drill bit's inner hole or blow air to discharge the impact broken gravel to the hole and assist the impact broken roc