Introduction to Piston Split Rod
Related products Link:
tripod-type down-the-hole drilling;
The splitting machine（Piston Split Rod） operates as follows:
Use a rock drill to drill a hole in the rock. The diameter of the hole depends on the outer diameter of the wedge assembly of the hydraulic splitter. The size of the wedge assembly depends on the size of the rock at the site. The volume of the rock is larger, so choose a large diameter The wedge component can also be small in diameter and porous, and the volume of the rock is small. Small diameter wedge components are used. The drilling depth is usually 500mm. When drilling holes, pay attention to the orientation of the ore drilling hole should be perpendicular to the surface of the hole site, the size of the hole should be compatible with the diameter of the splitter, and the depth of the hole should be 200-250mm deeper than the insertion length of the wedge component.
Insert the splitter into the hole and adjust the splitting direction appropriately as needed.
Start the pumping station.
Operate the reversing valve to extend the piston to split. After the rock cracks a small fine line, the reversing valve reverses the direction, the piston rod and the inner wedge retract, and the splitter（Piston Split Rod） is rolled to make it and Turn the direction of the crack at the beginning by an angle, and then split it again, so that one piece of rock can be collapsed into multiple pieces.
The product adopts special steel and special structure design. There is hydraulic quick connection, convenient connection and operation, no error, time and effort and space saving. The low temperature of the hydraulic station ensures the durability and stability of the system seals. Handle design, one operator can carry two splitters at a time. The price of Gaea equipment is low, the quality is good, and the splitting speed: split stones in 40-50 seconds. The company's splitting machine, splitting machine, stone splitting machine,, splitting machine, stone splitting machine, airborne splitting machine, has been widely praised! How much is a set of hydraulic splitting rod equipment in Gaea hydraulic splitting rod , It is composed of a cylinder, 8 pistons, multiple seals, multiple high-pressure oil pipes and several major components. Divided into an oil inlet pipe and an oil return pipe. The piston of the hydraulic rock breaker will extend when the oil is in, and this is a working process. That is the time when the rock broke. Its power source is a hydraulic power station that transmits fluid through oil pipes.
When the Gaea rock hydraulic Piston Split Rod is working, it will not produce vibration, impact, noise, dust, flying debris, rock particles, etc. The surroundings will not be affected, even in densely populated areas or indoors, and near precision equipment, you can work without a place. Economy: Rock hydraulic splitting machine can complete splitting in a few seconds, and can work continuously without interruption, high efficiency, low operation and cost, no need to take other time-consuming and expensive measures like exposing work. : The rock hydraulic splitting machine is different from most demolition and equipment. The rock hydraulic splitting machine can predetermine the splitting direction, the splitting shape and the required part size. It consists of a pump station and a device. The high-pressure oil output by the pump station drives the cylinder to generate thrust, drives the middle wedges in the wedge group to move forward, and pushes the opposite wedges to both sides. The main performance of the machine: The rock machine has no vibration, no impact, no noise, no dust, and can be completed in a few seconds. High work efficiency, controllable, moderate size, weight, simple operation, convenient maintenance, and can be used for demolition work in indoor and narrow places.
