Introduction of hydraulic wire saw machine
Related products Link:
The hydraulic wire saw machine is driven by the oil pressure of the hydraulic pump station to rotate the hydraulic motor. The hydraulic motor drives the driving wheel to rotate, and the driving wheel drives the rope to rotate. At the same time, the rope is guided by the driven wheel to control the direction of the rope to rotate at high speed, so as to achieve the cutting and dismantling of reinforced concrete. Purpose. The equipment can realize various cutting of thicker concrete. Generally used in static cutting and dismantling of bridges, bridge piers, dock platforms, and underwater concrete piles to ensure that the original structure is not damaged.
Instructions:
1. The diamond wire saw is divided into cutting directions, and there is a clear arrow mark on each clip of the spring diamond beaded wire saw.
2. If there is no indication of the arrow, it can also be identified by the beads of the diamond bead wire saw itself. The long tail of the bead base body is the front end, so the short front end is the cutting direction of the spring diamond bead wire saw.
3. Before use, the diamond wire saw is a closed loop after butting, if not, it needs to be butted first.
4. During use, the cutting direction of the diamond wire saw must be advanced, and the cutting direction cannot be reversed to avoid taper at the front and rear ends of the bead string, and to ensure the normal use of the diamond bead wire saw.
5. Install the diamond beaded wire saw on the wire saw, and relatively tighten the diamond beaded wire saw, and then start the equipment to start working.
