Internal combustion rock drill introduction
Product introduction Internal combustion rock drill is widely used for drilling blasting holes in rock tunnel excavation and various rock drilling operations. It is an important machine in rock engineering such as mining, railways, transportation, and water conservancy construction. The machine is easy to operate and efficient, reaching the first-class level of similar products, and can be completely interchangeable with international similar products.
Product features
1.The handheld internal combustion rock drill is a handheld rock drilling tool composed of a small gasoline engine, a compressor, and a rock drill.
2. During operation, the compressed air generated by itself blows away the rock powder in the blast hole.
3. The main machine weighs only 30KG, which is easy to carry. It is suitable for high mountains, areas without power supply and wind pressure equipment, and is particularly suitable for temporary projects with high mobility.
4. The hole can be drilled vertically downward, horizontally, and upward at less than 45°. The deepest vertical downward hole drilling depth is 6m. Product Use
Internal combustion rock drill is suitable for drilling holes in rocks. If a few parts are replaced, it can be converted into a crusher and compactor for various crushing, shoveling, digging, splitting, compacting and other work.
2. It can work in high mountains or flat land; in hot areas of +40°C or cold areas of -40°C. This machine has a wide range of adaptability.
