Hydraulic rock splitting machine construction plan
Related products Link:
tripod-type down-the-hole drilling;
Highways are rebuilt with broken rocks, etc. Rock crushing rock splitting machine static rock splitting machine construction process The rock splitting machine is mainly used in engineering construction. At work, mine. For rock mining, rescue and disaster relief, etc., the splitting machine is composed of two parts: a hydraulic power station and a splitting machine. Split in the intended direction. The hydraulic station supplies 60Mpa of hydraulic oil, which can generate tens of tons of thrust, and the splitting machine pushes the chip to expand on both sides. The expansion force can reach several hundred tons, so that the object is separated from the inside.
The splitting machine is mainly used for the secondary disintegration of large ore (metallic or non-metallic) in construction stone mining operations; partial and complete operations of concrete components (cement pavement, machine tool foundation, bridge and house components). Compared with the above-mentioned field operations. The splitting machine has a series of advantages such as simple structure, convenient operation, high operation efficiency, low cost, energy saving, energy saving, etc. The static rock splitting machine can save a part of labor.
Make the rock or concrete cracks in a few seconds. The third step: to make the cracks wider, you can use widened gaskets to widen the diesel type of high-pressure power station. Electric type, high-pressure tubing: standard, can be lengthened, according to the work needs to be lengthened Mining machine: 1~5 mining force: 600~800T mining diameter per rod: 42~46MM depth: 60~80 cm weight: single machine 28 kg Technical parameters of large splitting machine: First of all: It is also necessary to use a down-the-hole drill to drill a hole of 110 to a depth of 1.7 meters. Put the splitter body into the hole. The second step: The middle wedge uses hydraulic pressure to crack the clips on both sides outward to produce 5600 tons of force. The rock is mined in tens of seconds.
The third step: if you want to mine bigger, you can change the head. The company also has a large splitting machine. It is suitable for various rock-breaking projects such as large-scale mining, quarry, and foundation excavation. The above can explain that the excavation and modification of the rock expander is-large equipment is not easy to enter narrow sites such as narrow sites, blind corners and other operations.
Hydraulic rock splitting machine construction plan
Can keep the construction in good condition.
(3) Excavating subways and platform tunnels under urban buildings can protect ground buildings.
(4) During the construction of roads and railways, trenches can be constructed on the roadside without affecting the normal passage of vehicles.
(5) During the demolition of reinforced concrete buildings, there is no flying sand, no vibration and noise, and the construction can be kept peaceful.
(6) The foundation and walls can be demolished in workshops and buildings without affecting the buildings.
(7) Eliminate pile heads during bridge construction. Remove old bridge piles underwater.
(8) In the national defense construction, large bunkers such as underground oil depots, subsea oil depots, and hangars are excavated, because there is no vibration and sound. Smoke flying stones, etc., can enhance the concealment of the project. The principle of the hand-held hydraulic splitter: First: Drill holes of the corresponding diameter and depth on the object to be mined. Insert the strong peeling wedge of the miner into and out of the drill hole. The second step: The middle wedge uses hydraulic pressure to push the two opposite side wedges to produce a mining force of more than 800 tons.
