How many rocks can be split a day with a rock splitting machine
At present, when many customers in mining areas encounter hard rock, they cannot split the rock with some other mechanical equipment and blasting equipment, which makes it difficult for the project to proceed. Many people will find another way, but under the strict order of the country, the ordinary blasting method has been suspended. In the process of construction and mining, if some rocks are too hard and have good integrity, it is very difficult to use impact force to directly break them with external force. Even some rocks with high strength and toughness can be broken by improper operation when they are broken by a breaker. The breaker is damaged. So many bosses have begun to try to use splitter equipment.
Gaea Rock rock splitting machine adopts imported Hetai Steel forging and all imported materials. When the most important wedge block of the splitting machine is cast, the steel is processed by heat treatment process and forged with more than a dozen advanced processes on its parts. After being inspected strictly, each splitting machine must split a 25 cm thick and 1 meter long seamless steel pipe before leaving the factory, ensuring the excellent quality of the splitting machine. The gun tip is not easy to bend, does not rust, is durable, and the price is only about 1/4 of the price of similar foreign products, the speed is doubled, and the performance is good. Because a splitting machine can be equipped with 1 to 5 split guns, the price also ranges from 10,000 to 50,000, depending on the number of split guns you need.
The quality of Gaea Rock rock splitting machine is excellent, and its internal hydraulic system can last for more than 10 years. The wedge iron has a life of up to 30,000 repetitive work. Therefore, under the same number of equipment, our products must be far ahead of other products in the output value of each project, and they are durable, as long as they are used properly to ensure long-term use, thereby greatly reducing operating costs.
The maintenance of the equipment is also simple and convenient. Make sure to apply some lubricating grease between the middle wedges and the two side wedges after every 3~5 operations of the splitter to reduce the friction between the wedges and prolong the splitting. The service life of the machine!
Related products Link:
tripod-type down-the-hole drilling;
