Features of hydraulic Rock Splitting Rod
Related products Link:
tripod-type down-the-hole drilling;
Gaea Rock large hydraulic splitting rod, also called rock splitter, rock splitting rod, etc., is suitable for large-area rock-breaking. It is a rock-breaking tool for mechanized large-scale rock-digging. It is powered by a high-pressure pumping station and Composed of splitting rods, pressure 120-160MPA, combined splitting force of 1,800-3,600 tons, required to drill 100MM, depth of 0.9M, put the splitting rod into the splitting time of 1 minute, the splitting depth is up to 1-3 meters, 9-11 jacks are distributed on the rods, which can split a large area of rock.
1 Add anti-wear hydraulic oil to the oil station, which needs to be full. There is a cursor under the hydraulic oil station, just refer to the cursor.
2 Three-phase four-wire 380v must be connected. The motor needs to rotate clockwise.
3 Connect the high-pressure tubing to the splitting rod. The tubing colors can be divided into blue, black, blue tube high pressure, and black tube low pressure.
4 Hole drilling machine, 90 holes, hole depth of 1 meter 2. Can be shallow 5 rod distance 50, and the distance from the empty surface 50. This is for granite mining. It depends on the rock quality.
Splitting rod features
1. The controllable work of the splitting rod under static hydraulic pressure will not cause some hidden dangers like blasting and other impact demolition and rock drilling equipment, and no complicated measures are required.
2. Environmental protection When the splitting rod is working, it will not produce vibration, impact, noise, dust, flying debris, etc. The surroundings will not be affected, even in densely populated areas or indoors, and near precision equipment, you can work without a place.
